Kitchen Hood Size for 2-Burner or 3-Burner Stove Pakistan
You’ve installed a new gas stove. Cooking goes well — until the smoke from frying onions, tadka for daal, or a karahi full of chicken drifts through the whole house. You’re ready to buy a kitchen hood, but one question keeps coming back: should it be 60cm, 75cm, or 90cm?
Short answer: it depends on the actual width of your stove, not the number of burners. A 2-burner stove in one home can be wider than a 3-burner stove in another. This guide walks you through measuring correctly, matching stove width to hood width, and getting the suction power right for Pakistani cooking.
Kitchen Hood Size Quick Picks for Pakistani Stoves
|
Your stove situation |
Right kitchen hood width |
Notes |
|
Compact 2-burner, under 60cm stove width |
60cm hood |
Enough coverage, fits tight kitchens |
|
Wider 2-burner (65–75cm), frequent frying |
75cm hood |
Better capture for big karahi pans |
|
Compact 3-burner, under 75cm stove width |
75cm hood |
Covers middle + outer burners |
|
Standard 3-burner (75–90cm) |
90cm hood |
Safer coverage for outer burners |
|
Heavy Pakistani cooking (daily frying, tadka) |
Go one size wider than stove |
Extra capture area for smoke |
|
Compact apartment or hostel kitchen |
60cm hood |
Fits most small-kitchen layouts |
Available widths and specifications vary by brand. Compare dimensions of actual models from Izone, Fotile, and Dawlance at Lahore Centre before ordering.
What Is the Standard Kitchen Hood Size in Pakistan?
Kitchen hoods in Pakistan come in three main widths — 60cm, 75cm, and 90cm. These numbers refer to the width of the hood itself, not the suction opening or the exhaust pipe.
What Each Kitchen Hood Width Actually Means
|
Kitchen hood width |
Usually suitable for |
|
60cm |
Compact 2-burner stoves, small kitchens, apartments |
|
75cm |
Medium-width stoves, standard 3-burner stoves, average family kitchens |
|
90cm |
Wider 3-burner stoves, open kitchens, heavy cooking households |
Important: these are typical categories, not hard rules. A 60cm hood above a 72cm stove leaves the outer burners uncovered, and the smoke from them escapes straight into your kitchen.
General Rule for Matching Hood Width to Stove Width
-
The hood should be at least as wide as the stove
-
A hood wider than the stove gives better coverage, especially for Pakistani cooking with large pans
-
A hood narrower than the stove always underperforms — no amount of suction fixes poor coverage
Always compare the hood’s listed width (in cm) with your stove’s actual measured width before ordering.
What Size Kitchen Hood Do You Need for a 2-Burner Stove?
A 2-burner stove sounds small, but widths vary from about 30cm (built-in domino hobs) to 60cm+ (freestanding models with wide burner spacing). You need to measure, not guess.
Before choosing a hood width:
-
Measure the total width of the stove, leftmost edge to rightmost edge
-
Don’t measure only the distance between the two burners — you’ll undersize the hood
-
Note whether the stove sits against a wall or inside a cabinet — this affects mounting and ducting
-
Check the position of the exhaust duct opening in your kitchen wall
-
Think about your cooking habits — frequent frying and tadka need more capture area
Is a 60cm Kitchen Hood Enough for a 2-Burner Stove?
Usually yes, if your stove is 55–60cm wide or less. Most compact 2-burner stoves fall in this range. A 60cm hood covers the burners completely and fits in tight kitchen layouts, including apartments and hostel-style setups.
A 60cm hood becomes a problem when:
-
The stove is wider than 60cm (outer burners uncovered)
-
You use big karahi or paratha pans that extend beyond the burner edges
-
You fry daily — the smoke from frying rises fast and spreads outside the capture zone
When a 75cm Kitchen Hood Is a Better Choice for a 2-Burner Stove
Choose a 75cm hood over a 60cm when:
-
Your stove is 65cm wide or more
-
Your household frequently uses wide pans (karahi, tawa, pressure cooker)
-
You cook meat, fish, or heavily spiced food several times a week
-
You have the cabinet and wall space to mount a wider unit
-
You want the extra capture margin for smoke that drifts forward past the burners
The upgrade from 60cm to 75cm is usually small in price but meaningful in performance for Pakistani cooking.
What Size Kitchen Hood Do You Need for a 3-Burner Stove?
Three-burner stoves range from around 55cm (compact models with tightly-spaced burners) to 90cm+ (wider gas stoves and built-in hobs). The outer burners are the challenge — they sit near the edges of the stove, and if the hood doesn’t extend past them, smoke from those burners escapes sideways.
Before choosing a hood width for a 3-burner stove:
-
Measure the full stove width edge to edge
-
Note where the outer burners sit relative to the stove’s outer edges
-
Check whether karahi, tawa, or frying pans extend beyond the burner grates
-
Pick a hood that fully covers the cooking area, not just the burner centres
-
Confirm available wall or cabinet width above the stove
Is a 60cm Kitchen Hood Enough for a 3-Burner Stove?
Only if your 3-burner stove is genuinely narrow — under 60cm total width. Some compact 3-burner stoves do fit, especially in built-in domino or apartment setups. For most standard 3-burner stoves in Pakistani homes, a 60cm hood is too narrow and leaves the outer burners uncovered.
Rule of thumb: if you can see the outer burner grates sticking out past the hood when installed, the hood is too small.
When Should You Choose a 90cm Kitchen Hood?
A 90cm kitchen hood is the right pick when:
-
Your 3-burner stove is 80–90cm wide
-
Your household does heavy daily cooking — frying, tadka, karahi, biryani deg work
-
You have an open kitchen or breakfast-bar layout where smoke spreading into the living area is a bigger problem
-
You use large pans that extend to the stove’s full width
-
You have enough wall or cabinet space to mount a 90cm unit without obstruction
The extra 15cm of coverage over a 75cm hood makes a visible difference when you’re frying mutton or roasting spices.
How to Measure Your Stove Before Buying a Kitchen Hood
Don’t buy any hood until you’ve measured three things with tape.
Measure the Full Width of Your Gas Stove
-
Measure from the leftmost outer edge to the rightmost outer edge of the stove
-
Record the measurement in centimetres, not inches
-
Include the full body, not just the burner spacing or the grate area
-
Write the number down — you’ll need it when comparing hood models
Measure the Available Wall or Cabinet Space
-
Measure the width available above the stove where the hood will mount
-
Measure the depth available (how far the hood can project from the wall)
-
Measure the vertical height between the stove top and the bottom of any overhead cabinet
-
Note any obstructions — shelves, exposed pipes, electrical outlets, window frames
-
Confirm the hood’s actual product dimensions on the brand’s spec sheet
Check the Distance Between the Stove and Kitchen Hood
Mounting height matters for smoke capture, cooking safety, and manufacturer warranty. Too low and the hood traps heat near the gas flame; too high and smoke escapes before reaching the filters.
-
Follow the manufacturer’s specified mounting height — printed in the installation manual
-
Most Pakistani gas stove installations mount the hood somewhere between 65cm and 80cm above the stove surface, but this varies by model
-
Don’t apply one universal height to every hood — Izone, Fotile, and Dawlance each specify their own clearance
-
For built-in hobs vs freestanding gas stoves, clearance rules can differ
If in doubt, ask the technician who will install the hood or confirm with the brand’s support line before mounting.
Is Kitchen Hood Size More Important Than Suction Power?
Both matter — but they do different jobs. A hood that’s wide enough but weak on suction still leaves smoke lingering. A powerful hood that’s too narrow misses the smoke entirely because it can’t capture what’s already escaped sideways.
Width determines how much of your cooking surface the hood covers.
Suction capacity determines how much air the hood can pull through the filters per hour.
Filter condition determines how much of that airflow actually reaches the duct.
Duct design (short, straight runs vs long bendy ones) determines how much air exits the kitchen.
A premium hood with clogged filters and a poorly-run duct will underperform a cheaper hood with clean filters and a short straight duct.
How Much Suction Power Do You Need for a 2-Burner Stove?
The right airflow depends on your kitchen size, cooking frequency, how closed or open the kitchen is, and whether you run a ceiling fan while cooking. In general:
-
Light cooking (reheating, daal, occasional frying): lower-to-mid suction is enough
-
Daily full-meal cooking in a closed kitchen: mid-range suction works
-
Open-plan or breakfast-bar kitchen: you need stronger suction to prevent smoke drifting into the living room
Check the hood’s airflow rating in m³/h (cubic metres per hour) or CFM (cubic feet per minute) before buying. The spec sheet lists both.
How Much Suction Power Do You Need for a 3-Burner Stove?
A 3-burner stove generates more heat and smoke simply because it can cook more dishes at once. Pakistani cooking adds to the load — frying masala, karahi, bhuna meat, and deep-frying samosas all push the hood hard.
-
Higher airflow capacity usually makes a real difference on 3-burner stoves
-
Open kitchens need more suction than closed ones
-
A hood with multiple speed settings lets you crank up extraction during heavy cooking and reduce it during light use
Don’t pick one universal CFM number. Match the airflow to your kitchen dimensions, cooking style, and installation layout. Lahore Centre’s team can walk you through model-by-model airflow specs.
Does Pakistani Cooking Require a Wider or More Powerful Kitchen Hood?
Pakistani cooking is harder on kitchen hoods than most other cuisines. Here’s why that matters when picking a size.
What our daily cooking actually produces:
-
Frying onions and spices releases oil particles that stick to filters quickly
-
Tadka for daal creates a sudden burst of smoke that can overwhelm a weak hood
-
Karahi chicken and fish frying generates heavy oil vapour over long periods
-
Large cooking pots (biryani deg, salan patila) extend past burner edges
-
Open kitchens popular in new DHA, Bahria, and apartment designs let smoke reach the living area quickly
-
Oil residue builds up fast — filters need cleaning monthly during heavy-cooking seasons
A wider hood gives better coverage, but width alone doesn’t guarantee effective smoke removal. You also need suitable suction, clean filters, correct installation height, and a sensible duct path. Match the hood to your cooking, not to your guest’s kitchen.
Izone vs Fotile vs Dawlance Kitchen Hood — Which Size Should You Choose?
Lahore Centre stocks all three brands, each with their own strengths. Compare actual width and airflow specs on the product pages before deciding.
Izone Kitchen Hood
Izone kitchen hoods are known for solid value and practical design for Pakistani kitchens. Available in multiple widths with both standard and chimney-style installation options.
-
Widths available in 60cm and wider models — check the specific product page for exact dimensions
-
Suction specifications listed per model
-
Suitable for compact kitchens through standard family layouts
-
Confirm width, airflow, and mounting type against your stove measurements before ordering
Fotile Kitchen Hood
Fotile Kitchen Hood is a premium kitchen appliance brand with a focus on high-suction hoods designed for heavy cooking households. Common in modern DHA and Bahria kitchens.
-
Typically available in wider widths suited to 3-burner stoves and larger cooking surfaces
-
Higher-end filter design and quieter operation at full suction
-
Designed for daily heavy use
-
Check model-specific installation requirements — some need deeper cabinet clearance
Dawlance Kitchen Hood
Dawlance Kitchen Hood brings the same brand trust Pakistani families know from fridges and microwaves to kitchen hoods, with reliable warranty support and service coverage.
-
Available in multiple widths to match common Pakistani stove sizes
-
Suction specifications vary by model — compare on the product page
-
Suited to standard family kitchens with everyday cooking patterns
-
Official Dawlance Pakistan warranty on all models
How to decide between the three: match the available model’s width to your measured stove width first. Then compare airflow (m³/h or CFM), warranty, filter design, and price. The right brand is the one whose spec sheet fits your kitchen, not whichever name you’ve heard most.
Common Kitchen Hood Buying Mistakes Pakistani Homeowners Make
Avoid these and you’ll pick the right size the first time.
-
Buying a hood without measuring the stove. The single most common mistake. Always measure in cm before shopping.
-
Choosing a hood narrower than the cooking surface. Even strong suction can’t capture smoke that’s already escaped sideways past the hood.
-
Ignoring suction capacity. A wider hood with weak airflow isn’t better than a smaller hood with strong airflow.
-
Not checking cabinet and wall space. A 90cm hood that doesn’t fit the available mounting area is useless.
-
Ignoring the exhaust duct position. Long, bendy duct runs reduce extraction. Plan the duct path before buying.
-
Skipping installation clearance. Each hood has its own required gap from the stove — follow the manual, not a general rule.
-
Assuming wider automatically means more suction. Width and airflow are separate specs. Check both.
Where to Buy Izone, Fotile and Dawlance Kitchen Hoods in Pakistan
Lahore Centre stocks kitchen hoods from Izone, Fotile, and Dawlance with official brand warranty, installment plans for Lahore customers, and same-day Lahore delivery.
What to compare before ordering:
-
Width in cm against your measured stove width
-
Airflow rating in m³/h or CFM against your kitchen size and cooking frequency
-
Installation type — chimney, wall-mounted, or under-cabinet
-
Filter type — aluminum mesh, carbon, or combination
-
Warranty duration and coverage
-
Price and installment EMI if paying monthly
Call or WhatsApp the Lahore Centre team on 0333 3633637 for current prices, available widths, and installation guidance before ordering.
Final Verdict — Which Kitchen Hood Size Is Right for Your Stove?
The right kitchen hood size depends on your stove width, not the number of burners.
Quick decision guide:
-
2-burner stove under 60cm wide: Start with a 60cm hood
-
2-burner stove over 60cm or heavy frying household: Go with a 75cm hood
-
Compact 3-burner under 75cm: A 75cm hood usually covers it
-
Standard 3-burner 75–90cm: A 90cm hood gives the best coverage
-
All stoves + heavy Pakistani cooking: Size up one width for extra capture area
-
Any size: Match suction (m³/h or CFM) to your kitchen volume, not just to the hood width
Before you commit, measure the stove, measure the available mounting space, and compare at least two or three actual product specifications from Izone, Fotile, or Dawlance. The right hood is the one that fits your kitchen’s measurements — not whichever model looked best in a showroom.
Kitchen Hood Size FAQs for Pakistani Buyers
Should a kitchen hood be wider than a gas stove?
Yes, where possible. A hood that’s equal to or slightly wider than the stove gives better smoke capture, especially for Pakistani cooking with large pans. A hood narrower than the stove leaves outer burners uncovered and smoke escapes sideways.
Can I install a 90cm kitchen hood in a small kitchen?
Possibly. Kitchen size alone doesn’t determine suitability — what matters is available wall or cabinet width above the stove, the duct path to the exterior, and manufacturer clearance requirements. Measure the available mounting area before buying a 90cm model.
Does a kitchen hood need a separate exhaust pipe?
Ducted hoods need a pipe that vents smoke outside, usually through an exterior wall. Recirculating hoods filter the air and return it to the kitchen, no duct needed — but they require regular carbon filter replacement and extract less effectively than ducted models.
Can a kitchen hood be installed above a built-in hob?
Yes, but compatibility matters. Check the built-in hob’s width, your cabinet depth, electrical outlet position, and the hood manufacturer’s mounting instructions. Built-in hobs often need specific clearance that differs from freestanding gas stoves.
Why does my kitchen hood fail to capture smoke from the front burners?
Usually because the hood is mounted too high, the hood depth is too shallow, or the airflow is too weak for the kitchen. Front-burner smoke escapes faster than back-burner smoke because it’s closer to the user. Check mounting height, clean the filters, and consider a deeper or higher-suction model if the problem persists.