How to Set Up PS5 on a Samsung 4K LED TV for GTA 6
You have your PlayStation 5 ready, GTA 6 installed and a Samsung 4K LED TV waiting for the action. But is the TV actually showing you the best picture it can, with the quickest response to your controller?
On most setups, the answer is "not yet". Out of the box, many TVs run heavy picture processing that adds input delay, and the PS5 may not be sending the full 4K HDR signal the screen supports. A few minutes in the settings menus fixes both. Choosing the right HDMI port, switching on Game Mode, enabling HDR and selecting the correct resolution all make a visible difference on a Samsung Smart LED TV.
This guide walks you through the full setup for running your PS5 on a Samsung Smart TV, including:
-
How to connect the PS5 to a Samsung TV
-
How to enable Game Mode and Auto Low Latency Mode
-
The recommended PS5 resolution, HDR and 120Hz settings
-
How to make gameplay feel more responsive
-
Fixes for common HDMI and display problems
-
What to check when choosing a Samsung 4K LED TV for gaming
Quick takeaways
-
GTA 6 runs on the PS5; the Samsung TV only displays it. Any Samsung 4K LED TV with an HDMI port can play it.
-
Use the HDMI cable that came with the PS5, and plug it into the TV's gaming-capable HDMI port if your model has one.
-
Turn on Game Mode (or Auto Game Mode) on the TV first. It has the biggest single effect on responsiveness.
-
On the PS5, set Resolution and 120Hz Output to Automatic and HDR to On When Supported, then run Adjust HDR.
-
A 60Hz Samsung 4K LED TV still gives a good GTA 6 experience. 120Hz matters only if the TV, the port and the game mode all support it.
Can You Play GTA 6 on a Samsung 4K LED TV?
Yes. You can play GTA 6 on any Samsung 4K LED TV by connecting a PlayStation 5 to one of the TV's HDMI ports. The console runs the game and the TV displays it, so no special Samsung gaming model is required.
Rockstar Games released Grand Theft Auto VI on 19 November 2026 for PlayStation 5 and Xbox Series X|S. On the PlayStation side, it plays on the standard PS5, the PS5 Slim (disc and Digital Edition) and the PS5 Pro.
One point often causes confusion: GTA 6 is a PS5 game, not a Samsung Smart TV app. You will not find it in the Samsung TV's app store, and the TV's own processor does not run it. Everything happens inside the console, and the picture travels to the TV through a single HDMI cable.
Do you need a dedicated gaming TV?
No. A dedicated gaming television is not compulsory. A regular Samsung Smart LED TV with 4K resolution, HDR support and Game Mode covers what most players need. Gaming-focused features such as 120Hz refresh rate and Variable Refresh Rate (VRR) are useful extras, not requirements.
How 4K improves what you see in GTA 6
A 4K UHD screen has 3840 × 2160 pixels, four times as many as a Full HD (1080p) screen. When the PS5 sends a 4K signal, distant details such as street signs, traffic, character faces and the skyline look sharper, especially on 50-inch and larger screens.
The real result depends on two things working together:
-
The TV's specifications: native resolution, HDR format support, refresh rate and HDMI port capability.
-
The console's output: the PS5 model you own, the game's graphics mode and the video settings you choose.
A well-configured 60Hz Samsung 4K LED TV will often look better than a poorly configured high-end model, which is why the setup steps below matter.
What Do You Need to Connect PS5 to a Samsung Smart TV?
You need four things: a PS5 console, an HDMI cable (ideally the one supplied with the PS5), a Samsung 4K LED TV with a free HDMI port, and a stable power supply and internet connection for updates and the game download.
PlayStation 5 console
Every current PlayStation 5 model connects to a Samsung TV the same way, through its HDMI OUT port:
-
PS5 (original) and PS5 Slim: support 4K output, HDR and 120Hz output on compatible TVs.
-
PS5 Pro: supports the same display features and adds extra graphics power for higher image quality and steadier performance in games that are enhanced for it.
Whichever model you have, the TV setup in this guide is the same.
HDMI cable for 4K gaming
The cable matters more than most people expect, especially for 4K at 120Hz.
-
Use the cable supplied with the PS5. Sony includes an Ultra High Speed HDMI cable that supports HDMI 2.1 bandwidth, so it handles 4K HDR at 120Hz.
-
Replacing it? Buy a certified Ultra High Speed HDMI cable. An older "High Speed" cable is usually fine for 4K at 60Hz but can cause flickering or blank screens at 4K 120Hz.
-
Keep it short and direct. Connect the PS5 straight to the TV where possible. Extra adapters, switches or long cable runs are a common cause of signal drops.
-
The port matters too. A good cable cannot add features the TV's HDMI port does not support. If only one port on your Samsung TV handles higher bandwidth or 120Hz, the PS5 must be plugged into that one.
Samsung 4K LED TV
Check these specifications on your Samsung Smart LED TV (they are listed on the box, in the user manual or on the product page):
-
4K UHD resolution: 3840 × 2160 pixels, for the sharpest PS5 picture.
-
HDR support: formats such as HDR10, HDR10+ and HLG. The PS5 uses HDR10 for games.
-
HDMI connectivity: the number of HDMI ports and whether any are HDMI 2.1 or labelled for gaming.
-
Refresh rate: most Samsung Crystal UHD LED models are 60Hz; selected higher-end models offer 100Hz or 120Hz panels.
-
Game Mode: found on Samsung Smart TVs to reduce input lag.
-
VRR and ALLM: available on supported models only. ALLM appears on many recent Samsung TVs as "Auto Game Mode"; VRR is usually limited to higher-refresh models.
Stable power and internet connection
Two practical points are easy to overlook:
-
Power: in areas with voltage fluctuations or load-shedding, connect both the PS5 and the TV through a good-quality surge protector or voltage stabiliser, and a UPS if you can. Sudden power cuts during a system update can corrupt data.
-
Internet: GTA 6 is a very large download, and both the PS5 and the Samsung TV receive regular firmware updates. A wired Ethernet connection or a strong 5GHz Wi-Fi signal makes downloads faster and more reliable. Check that the PS5's SSD has plenty of free space before you start.
How to Connect PS5 to a Samsung Smart TV Step by Step
Connecting a PS5 to a Samsung Smart TV takes about five minutes: plug the HDMI cable into the console and the TV, power both on, select the right HDMI input and confirm the picture. Here is each step in detail.
Step 1 – Connect the HDMI cable to your PS5
Find the HDMI OUT port on the back of the PS5. On the original PS5, PS5 Slim and PS5 Pro it sits on the rear panel next to the USB and power ports, and it is the only HDMI port on the console. Push one end of the cable in firmly until it sits flush.
Step 2 – Connect HDMI to your Samsung 4K LED TV
Plug the other end into an HDMI input on the TV. Samsung places these on the back or side panel; on some models they are on a separate One Connect box.
Before choosing a port, look at the labels next to each one. Selected Samsung models have a dedicated gaming port, marked with a label such as "4K 120Hz", "HDMI 2.1" or a game controller icon. That port carries the higher-bandwidth features. Port numbering differs between models, so do not assume HDMI 1, 2 or 3 is the right one; check the labels or your model's user manual.
If your TV has no special label, any HDMI port will work for 4K at 60Hz. Avoid the port marked eARC/ARC if you plan to connect a soundbar there.
Step 3 – Turn on your PS5 and Samsung TV
Power on the Samsung TV first, then press the power button on the PS5 or the PS button on the DualSense controller. Turning the TV on first lets the console read the TV's display capabilities (resolution, HDR, refresh rate) during its HDMI handshake, which helps the PS5 pick the correct output automatically.
Step 4 – Select the correct HDMI input
On most recent Samsung Smart TVs:
-
Press the Home button on the Samsung remote.
-
Go to Connected Devices (or Source on older models).
-
Select the HDMI port you used. Samsung TVs usually detect a PS5 and show its name or a PlayStation icon on that input.
If HDMI-CEC (called Anynet+ on Samsung TVs) is on, the TV may switch to the PS5 automatically when you turn the console on.
Step 5 – Confirm the PS5 display
You should see the PS5 home screen or, on a first-time setup, the language selection screen. Check three things:
-
The image fills the whole screen with no black borders or cut-off edges.
-
Text and icons look sharp, not soft or stretched.
-
The picture is stable, with no flickering or brief blackouts.
To confirm the actual signal, go to PS5 Settings → Screen and Video → Video Output → Video Output Information. This shows the current resolution, HDR status and refresh rate the console is sending to your Samsung TV.
How to Enable Game Mode on Samsung Smart LED TV
Game Mode is the single most useful setting for playing PS5 on a Samsung Smart TV. It switches off much of the TV's picture processing so your button presses reach the screen faster.
What is Game Mode on Samsung TV?
Game Mode is a Samsung Smart TV setting that lowers input lag, the delay between pressing a button on the controller and seeing the result on screen. It works by skipping or reducing processing steps such as motion smoothing and some noise reduction.
In practice, this means:
-
Lower input lag: steering, aiming and camera movement follow your hands more closely.
-
Faster response to controller input: menus and gameplay feel snappier.
-
Less picture processing: the TV shows the PS5's image more directly instead of reworking it.
This is especially noticeable in GTA 6's driving, chases and shootouts, where a fraction of a second affects how precise the controls feel.
How to turn on Game Mode
Menu names differ by model and year, but the general route is:
-
Press the Home button on your Samsung remote.
-
Open Settings (then All Settings on newer models).
-
Go to Connection → Game Mode Settings on recent models, or General → External Device Manager → Game Mode Settings on older ones.
-
Set Game Mode to On, or to Auto where available.
Game Mode applies to the current HDMI input, so switch to the PS5's input before turning it on. If the option is greyed out, make sure the PS5 source is selected and that you are not using a TV app at the time.
What is Auto Low Latency Mode (ALLM)?
Auto Low Latency Mode (ALLM) lets a console tell the TV to switch into its low-latency mode automatically. On compatible Samsung TVs it often appears as Auto Game Mode. With it on, the TV enters Game Mode when the PS5 starts sending a game signal and can switch back to your normal picture settings when you watch a film through an app.
ALLM is available on supported models only, and Samsung's gaming features and menu paths vary by model. If your TV does not offer Auto Game Mode, simply turn Game Mode on manually for the PS5's HDMI input; the TV remembers the setting for that port.
Best Samsung 4K LED TV Picture Settings for GTA 6
The best picture settings for GTA 6 on a Samsung 4K LED TV keep Game Mode on, set brightness so dark scenes stay readable, keep colours natural and turn off extra processing. No single set of numbers suits every Samsung model or room, so treat the advice below as a starting point and adjust by eye.
Choose the right picture mode
Samsung TVs offer several picture modes. For gaming:
-
Game Mode: the priority for PS5 play. It gives the lowest input lag, even if some image enhancements switch off.
-
Standard Mode: a balanced everyday mode, but with more processing and higher input lag than Game Mode.
-
Dynamic Mode: very bright with exaggerated colour and sharpness. It suits a showroom floor, not long gaming sessions, and can crush dark detail in night-time scenes.
When Game Mode is on, some picture modes may be locked or changed automatically. That is normal. Gaming settings should put responsiveness and visibility first, then picture polish.
Adjust brightness and contrast
GTA 6 moves between bright daytime streets and dark interiors and night drives, so balance matters.
-
Raise Brightness until you can see detail in shadows, such as dark alleys or car interiors at night, without the black areas turning grey.
-
Set Contrast high enough that bright skies and neon look punchy, but not so high that clouds and lights lose detail.
-
In a bright room during the day, a higher backlight level helps. For night play in a dim room, lower it to reduce eye strain.
When HDR is active, the TV switches to separate HDR picture settings, so check brightness again in an HDR game.
Adjust sharpness and colour settings
-
Sharpness: keep it low. Excessive sharpening adds white halos around edges and makes fine detail look grainy. The PS5's 4K signal is already sharp.
-
Colour: aim for natural skin tones and realistic skies. If faces look orange or the sky looks neon, lower the colour setting a little.
-
Colour tone: a "Warm" setting is usually closer to how the game is designed to look than "Cool".
Disable unnecessary motion processing
Features such as Auto Motion Plus (Samsung's motion smoothing), heavy noise reduction and contrast enhancers analyse several frames before showing them. That extra processing can increase input delay and may cause the "soap opera" look.
Game Mode disables most of these automatically. If any remain available in your model's Expert Settings while gaming, switch them off.
Configure screen fit and aspect ratio
If the edges of the PS5 menu are cut off or there are black borders, the TV is scaling the image.
-
On the Samsung TV, go to Picture → Picture Size Settings and choose 16:9 Standard, then turn on Fit to Screen where available.
-
On the PS5, go to Settings → Screen and Video → Display Area and adjust so the corner markers just touch the screen edges.
Correct scaling prevents cropped HUD elements, such as the GTA 6 mini-map and on-screen prompts.
Recommended PS5 Display Settings for Samsung 4K LED TV
For most Samsung 4K LED TVs, set the PS5's Resolution, 120Hz Output, VRR and Video Transfer Rate to Automatic, set HDR to On When Supported, and complete the Adjust HDR calibration. You will find these under PS5 Settings → Screen and Video → Video Output.
|
PS5 setting |
Recommended configuration |
What it does |
|
Resolution |
Automatic, or 2160p if supported |
Sends the highest resolution your Samsung TV accepts |
|
HDR |
On When Supported |
Uses HDR only in games and apps that support it |
|
120Hz Output |
Automatic |
Allows 120Hz in games that offer it, on TVs and ports that support it |
|
VRR |
Automatic, if supported |
Matches the TV's refresh rate to the game's frame rate to reduce tearing |
|
ALLM |
Automatic, if the option is shown |
Signals the TV to switch into its low-latency game mode |
|
Adjust HDR |
Complete the on-screen calibration |
Sets HDR brightness limits for your specific TV |
|
Video Transfer Rate |
Automatic initially |
Controls signal bandwidth; lower it only to fix flickering |
In simple terms: Automatic lets the PS5 and the Samsung TV agree on the best signal both can handle. Change a setting by hand only when something looks wrong.
How to enable 4K resolution on PS5
1080p (Full HD) is 1920 × 1080 pixels. 2160p (4K UHD) is 3840 × 2160 pixels, four times the detail. On a 4K screen, a 1080p signal has to be upscaled by the TV, which looks softer.
To enable 4K:
-
Go to Settings → Screen and Video → Video Output.
-
Open Video Output Information to see what the connected HDMI device supports. The list shows each resolution and whether HDR and 120Hz are available.
-
Set Resolution to Automatic, or choose 2160p if it appears in the list.
If 2160p does not appear, the PS5 is not detecting 4K support. The TV must have a native 4K panel and the HDMI port must accept a 4K signal; see the troubleshooting section below.
How to enable HDR on PS5 and Samsung TV
HDR (High Dynamic Range) widens the range between the darkest and brightest parts of the picture and shows more colour. In GTA 6, that means brighter sunsets and headlights without losing detail in the shadows.
To set it up:
-
Check HDR compatibility: Samsung 4K LED TVs support HDR10, which is the format the PS5 uses for games. Many models also support HDR10+ and HLG.
-
PS5 HDR setting: set HDR to On When Supported under Video Output.
-
Samsung Input Signal Plus: on many Samsung models, high-bandwidth HDR signals on an HDMI port need Input Signal Plus turned on for that port. Go to Settings → All Settings → Connection → External Device Manager → Input Signal Plus (or General → External Device Manager on older models) and enable it for the PS5's HDMI port. The exact path varies by model, and some newer TVs enable it automatically.
-
HDR calibration: go to Settings → Screen and Video → Video Output → Adjust HDR and follow the three screens, adjusting until the symbol is just barely visible each time. This tells the PS5 how bright and dark your TV can actually go.
Should you enable 120Hz output for GTA 6?
Yes, leave 120Hz Output on Automatic. It does no harm on a 60Hz TV, and on a 120Hz TV it lets supported games use the higher rate.
-
60Hz vs 120Hz: a 60Hz TV refreshes the image 60 times per second; a 120Hz TV refreshes 120 times, which makes fast camera movement look smoother when the game runs at a higher frame rate.
-
What a 120Hz TV offers: smoother motion and slightly lower input lag in games that support high frame rate modes.
-
120Hz output is not the same as 120 FPS: the TV's refresh rate is the upper limit. The game decides how many frames per second it actually produces. A game running at 30 or 60 FPS will not become 120 FPS on a 120Hz TV.
-
Check GTA 6's own options: look at the game's graphics settings menu to see which performance or quality modes are available on your PS5 model, and what frame rate each targets. Choose a performance-focused mode if smoothness matters most to you, and a quality mode if you prefer maximum detail.
Does HDMI 2.1 improve PS5 gaming?
HDMI 2.1 improves PS5 gaming when you need 4K at 120Hz or VRR. For 4K at 60Hz with HDR, HDMI 2.0 is enough.
-
HDMI 2.0: handles 4K at 60Hz with HDR. This covers most Samsung Crystal UHD LED TVs and most games.
-
HDMI 2.1: adds the bandwidth for 4K at 120Hz, plus features such as VRR and ALLM.
-
VRR helps most in games whose frame rate moves up and down, by reducing screen tearing and stutter.
-
ALLM helps any game, because it switches the TV into low-latency mode automatically.
The PS5 supports HDMI 2.1 and 4K 120Hz output, but the Samsung TV and the specific HDMI port must support the same features. For story-driven open-world games played at 30 or 60 FPS, a 4K 60Hz HDMI 2.0 connection with HDR still delivers an excellent picture.
Common PS5 Connection Problems on Samsung 4K LED TVs
Most PS5 problems on a Samsung 4K LED TV come from the wrong input, a loose or low-spec HDMI cable, a port that lacks the needed bandwidth, or a setting such as Input Signal Plus being off. Work through the checks below in order.
Samsung TV showing "No Signal" when PS5 is connected
-
Incorrect HDMI source: press Home → Connected Devices and select the exact port the PS5 is in.
-
Loose HDMI cable: unplug and reseat both ends firmly. Try the cable the other way round.
-
Faulty HDMI port: move the cable to a different HDMI port on the TV to rule out a damaged input.
-
Console display output issue: turn the PS5 off, then hold the power button until you hear a second beep (about seven seconds) to start in Safe Mode. Choose Change Video Output and select a lower resolution such as 1080p. Once you have a picture, raise it again in Settings.
PS5 not displaying 4K resolution on Samsung TV
-
TV resolution compatibility: confirm the model is a native 4K UHD TV, not a Full HD model.
-
HDMI port limitations: some ports on some models accept a lower bandwidth. Try the port labelled for gaming or 4K.
-
PS5 resolution settings: set Resolution to Automatic or 2160p, and check Video Output Information.
-
HDMI cable requirements: use the cable supplied with the PS5 or a certified Ultra High Speed HDMI cable, and turn on Input Signal Plus for that port.
HDR not working on Samsung Smart TV
-
Input Signal Plus: the most common cause. Turn it on for the PS5's HDMI port.
-
HDR compatibility: check that the TV supports HDR10 and that the game supports HDR.
-
PS5 HDR configuration: set HDR to On When Supported, then run Adjust HDR again.
-
TV software updates: go to Settings → Support → Software Update on the Samsung TV and install any update.
PS5 screen flickering during gaming
-
HDMI cable quality: older or uncertified cables struggle with 4K HDR at 120Hz. Swap to an Ultra High Speed HDMI cable.
-
Video Transfer Rate: under Video Output, change 4K Video Transfer Rate from Automatic to -1, and to -2 if flicker continues. This lowers bandwidth slightly with little visible difference.
-
HDMI port compatibility: move the PS5 to the TV's highest-spec port, and avoid HDMI switches or splitters.
-
Firmware updates: update both the PS5 system software and the Samsung TV software.
Why does PS5 gaming feel slow on Samsung TV?
-
Input lag: the TV is processing the image before showing it.
-
Game Mode: check it is on for the PS5's HDMI input. This fixes the issue in most cases.
-
Picture processing: turn off Auto Motion Plus and noise reduction if your model still allows them in Game Mode.
-
Controller responsiveness vs network latency: a delay in single-player driving and shooting is usually display lag. Rubber-banding or delays only in online play point to your internet connection instead; a wired Ethernet connection usually helps.
If the DualSense itself feels unresponsive, connect it to the PS5 with its USB cable to rule out a wireless issue.
Which Samsung 4K LED TV Is Best for PS5 and GTA 6?
The best Samsung 4K LED TV for PS5 and GTA 6 is the one that matches your room size, viewing distance and budget, while offering 4K UHD, HDR and Game Mode. Higher-refresh HDMI 2.1 models suit players who want 120Hz, but they are not essential for a great experience.
Before buying, compare screen size, native refresh rate, HDMI port specifications, HDR format support and gaming features across the Samsung Smart LED TV range.
Is a Samsung 43-inch 4K LED TV good for PS5?
Yes, a 43-inch Samsung 4K LED TV is a good choice for bedrooms, hostel rooms and smaller lounges. At a typical seating distance of about 1 to 1.6 metres, a 43-inch screen fills your view without making you move your eyes around to read the mini-map and HUD. It is also easier to fit on a desk or small TV unit. The trade-off is that the extra 4K detail is less noticeable if you sit far back.
Is a Samsung 50-inch or 55-inch 4K LED TV better for gaming?
For most living rooms, 50-inch and 55-inch Samsung 4K LED TVs are the sweet spot for gaming. As a rough guide, a 50-inch screen suits a seating distance of around 1.3 to 1.9 metres, and a 55-inch around 1.4 to 2.1 metres. At these sizes, 4K detail is clearly visible, and open-world games such as GTA 6 feel more immersive. If you sit further than about 2.5 metres away, consider 65 inches or larger.
Is a 60Hz Samsung 4K LED TV good enough for PS5?
Yes. A 60Hz Samsung 4K LED TV is good enough for the PS5 and gives a sharp, smooth picture in games that run at 30 or 60 FPS, which covers a large share of PS5 titles. With Game Mode and HDR set correctly, it delivers a very good GTA 6 experience.
120Hz becomes relevant if you mostly play fast competitive shooters or racing games with high-frame-rate modes, or if you want the smoothest possible motion in future games. In that case, choose a model with a 120Hz panel and an HDMI 2.1 port.
What features should you check before buying a Samsung Smart LED TV for gaming?
Use this checklist when comparing Samsung Smart LED TV models for PS5:
-
4K UHD resolution: native 3840 × 2160 panel
-
HDR support: HDR10 at minimum; HDR10+ is a bonus for streaming
-
HDMI ports: at least three, so the PS5, a soundbar and another device can stay connected
-
Native refresh rate: 60Hz for everyday gaming; 100Hz or 120Hz for high-frame-rate play
-
Game Mode: standard on Samsung Smart TVs; check for Auto Game Mode
-
HDMI 2.1, if required: only needed for 4K at 120Hz and VRR
-
VRR and ALLM support: useful extras on supported models
-
Screen size and viewing distance: match the screen to where you sit
Get Your Samsung 4K LED TV Ready for GTA 6
Setting up a PS5 on a Samsung Smart TV for GTA 6 comes down to six steps:
-
Connect the PS5 through HDMI, using the supplied Ultra High Speed cable.
-
Select the correct input on the Samsung TV, ideally the port labelled for gaming.
-
Enable Game Mode (or Auto Game Mode) for the PS5's HDMI input.
-
Configure 4K resolution by setting the PS5's Resolution to Automatic or 2160p.
-
Adjust HDR settings: turn on Input Signal Plus, set HDR to On When Supported and run Adjust HDR.
-
Check refresh rate and gaming features, such as 120Hz, VRR and ALLM, if your TV supports them.
Do these once, and every session on your Samsung 4K LED TV will look sharper and feel more responsive.
Planning to upgrade your gaming setup? Compare Samsung Smart LED TV models at Lahore Centre and choose a 4K LED TV that matches your room, budget and gaming requirements.
PS5 on a Samsung Smart TV: Frequently Asked Questions
Can I play GTA 6 on a Samsung 4K LED TV?
Yes. Connect a PS5 to the Samsung 4K LED TV with an HDMI cable. The PS5 runs GTA 6 and the TV displays it. GTA 6 is not a Samsung Smart TV app, so you need the console.
How do I connect PS5 to Samsung Smart TV?
Plug the HDMI cable into the PS5's HDMI OUT port and an HDMI port on the TV. Turn on the TV, then the PS5, and select that HDMI input from Home → Connected Devices on the Samsung remote.
Which HDMI port should I use for PS5 on Samsung TV?
Use the port labelled for gaming, "4K 120Hz" or "HDMI 2.1" if your model has one. Port numbers differ between Samsung models, so check the labels or the manual. If no port is labelled, any HDMI port works for 4K at 60Hz.
How do I enable Game Mode on Samsung TV?
Press Home, open Settings, go to Connection (or General → External Device Manager on older models) → Game Mode Settings, and set Game Mode to On or Auto. Select the PS5's HDMI input first.
Does Samsung 4K LED TV support PS5 HDR?
Yes. Samsung 4K LED TVs support HDR10, the format the PS5 uses for games. Turn on Input Signal Plus for the PS5's HDMI port where your model has it, and set the PS5's HDR to On When Supported.
Is HDMI 2.1 necessary for PlayStation 5?
No. HDMI 2.0 handles 4K at 60Hz with HDR, which suits most games. HDMI 2.1 is needed only for 4K at 120Hz and VRR, and only if your TV and its port support them.
Can I play GTA 6 on a 60Hz Samsung TV?
Yes. GTA 6 plays well on a 60Hz Samsung 4K LED TV. With Game Mode on and HDR set up, you get a sharp and responsive picture. Check the game's graphics menu to choose the mode that suits you.
Does PS5 automatically detect Samsung TV resolution?
Yes. With Resolution set to Automatic, the PS5 reads the TV's capabilities over HDMI and selects the highest supported resolution. You can confirm it under Screen and Video → Video Output → Video Output Information.
Why is my Samsung TV not detecting my PS5?
Usually the wrong input is selected or the cable is loose. Reseat the cable, try another HDMI port, and select the correct source. If the screen stays blank, start the PS5 in Safe Mode and lower the video output to 1080p.
Is a Samsung UHD 4K TV good for gaming?
Yes. A Samsung UHD 4K TV offers 4K resolution, HDR and Game Mode, which cover what most PS5 players need. Higher-end models add 120Hz, VRR and HDMI 2.1 for fast-paced, high-frame-rate games.
What is the best screen size for PS5 gaming?
It depends on your seating distance. A 43-inch screen suits about 1 to 1.6 metres, 50 to 55 inches suits about 1.3 to 2.1 metres, and 65 inches or larger suits rooms where you sit further back.
Does a 120Hz Samsung TV improve GTA 6 graphics?
A 120Hz TV can make motion smoother, but it does not add detail or raise the game's frame rate by itself. The benefit depends on the frame rate GTA 6's chosen mode actually runs at on your PS5 model.